MRB accessories: Machine attachment kit

General Information:
Note
This document serves as a guide to assist with the assembly of the application. It is not a typical installation manual.
Safety notice
Seek professional assistance if necessary to avoid dangerous situations and injuries.
Assembly Parts
Nr | Quantity | Designation |
|
1 | 2 | Latch pin | |
2 | 4 | Screws DIN 7991 M6x16 | |
3 | 2 | MRB-Flange | |
4 | 2 | Adapter Plate | |
5 | 2 | Mounting brackets | |
6 | 4 | Screws DIN 912 M10x14 |
Required Tools:
- Hex keys of sizes 4 and 8 mm.
Procedure:
The kit enables precise positioning of the mobile robot base using two flange plates that are mounted directly on the machine or wall. The counterparts (centering plate and centering pin) are installed on the MRB workbench.
The flange plate is attached to the mounting surface using 2 screws provided. The machine flanges are mounted on the machine. The product can then be secured to the machine flanges with the help of the latch pins.


*
Flange Plate - Installation on MRB

Machine flange - horizontal installation

Angle for machine flange - vertical installation

Dimensions of the cutout for the mounting device (applicable for MRB S, M, and L)

Dimensions of the flange plate (for horizontal installation) and machine flange (for vertical installation), applicable for MRB S, M, and L.

Dimensions of the mounting device for flange plates and machine flanges for MRB S.

Dimensions of the mounting device for flange plates and machine flanges for MRB M.

Dimensions of the mounting device for flange plates and machine flanges for MRB L.
