Mobility and AMR
M1 is the HDK's standard AMR option, based on the Gessmann GESSbot. The AMR moves between workstations; PLEXA One handles manipulation at the destination. Select M1 in the hardware configurator. M2 is a separate heavy-duty base selection.
The mobile building block
| Specification | GESSbot base platform |
|---|---|
| Dimensions / unladen mass | 950 × 718 × 420 mm / 150 kg |
| Permissible payload | 500 kg; budget for robot, column, tooling, utilities and workpiece |
| Maximum speed / battery life | 1.2 m/s / up to 12 hours |
| Navigation / charging | LiDAR and digital map / automatic inductive or contact charging |
Gessmann's product data describe the base platform. The complete HDK configuration defines its assembled envelope, centre of gravity, permitted load cases and operating limits.
Connect transport and manipulation
| Responsibility | Interface and task |
|---|---|
| AMR and fleet | Vehicle missions, localisation, docking, charge state and vehicle faults; Gessmann fleet interface (VDA 5050) |
| Robot Control | Arm and column execution through the documented Robot APIs |
| Your application | Station identity, arrival/standstill acknowledgement, manipulation readiness and completion |
| Electrical installation | Battery/DC power budget, suitable converters, network, grounding and service access |
Travel → dock and confirm standstill → manipulate → stow → release the next mission. The station handshake includes timeouts, interrupted missions and a defined recovery state.
Protection across the whole system
Coordinate vehicle protective fields with the arms, column, tools and held load. The operating modes define permitted motion, stop response and restart for the complete installation. Continue with Safety and commissioning, Control and interfaces and mechanical integration.